Product Includes
Brass plate, diamond cut dimmer knob, plus all required mounting hardware.
Installation Steps
Step 1: Turn Off the Power
Before you begin, switch off the power to the circuit at your home’s breaker panel or fuse box for safety.
Step 2: Remove the Old Cover Plate
Use a screwdriver to loosen the screws holding the existing cover plate. Remove it carefully and place it aside.
Step 3: Take Out the Old Switch
Unscrew the fasteners securing the old switch to the electrical box, then gently pull the switch outward.
Step 4: Disconnect the Wires
Carefully detach the wires from the old switch.
• If the wires are looped around screws, loosen the screws to release them.
• If the wires are pushed into holes at the back of the switch, you may need to cut and strip them using a wire stripper.
Step 5: Connect the Wires to the New Switch
Attach the wires to the new dimmer switch.
• If the switch uses screws, wrap the wires around them and tighten securely.
• If the switch has push in holes, insert the stripped wire ends into the openings.
Step 6: Secure the New Switch
Carefully place the wires back into the electrical box and fasten the new switch using the included screws.
Step 7: Attach the New Cover Plate
Position the new cover plate over the switch and secure it in place with the screws.
Step 8: Turn the Power Back On
Once everything is installed, restore power at the breaker panel or fuse box.
Step 9: Test Your New Switch
Turn the dimmer knob to confirm everything is working correctly. If installed properly, your lights should brighten and dim smoothly.
If anything seems unclear or does not feel right during installation, contact a licensed electrician. Safety should always come first.
