Solid brass
Built to last 50+ years
UL & CE Certified
Tested for US & EU safety standards
Antimicrobial
Brass kills 99.9% of bacteria
Questions or custom requests? We're here to help.
Can't find the exact switch or layout you need?
Try our Product Configurator to build your perfect combo: mix toggles, dimmers, outlets, or order plates only in any 1–5 gang setup.
This 6-gang solid brass knurled rotary dimmer is designed for larger installations where multiple lighting zones need to be controlled from a single, streamlined plate. When paired with high-quality dimmable LEDs or TRIAC (leading-edge) compatible drivers, it provides smooth, stable dimming across all six circuits.
Each diamond-knurled brass knob offers a weighted, precise feel, allowing for easy, consistent fine-tuning across each lighting zone.
This dimmer uses TRIAC (leading-edge) technology, compatible with most dimmable LED and incandescent bulbs. Always verify your bulb or driver is labeled TRIAC / leading-edge compatible before ordering.
Not compatible with: trailing-edge (ELV), 0–10V, DALI, magnetic low-voltage, or smart bulbs.
If replacing an existing dimmer, confirm whether your setup requires single-pole or 3-way wiring.
Use dimmable bulbs only — incompatible LEDs may flicker, buzz, or have a limited dimming range.
Included mounting screws:
Our wall plates are crafted from solid brass and finished entirely by hand. This process gives each piece a deeper, more refined look than plated alternatives, while naturally allowing for subtle variations from one item to another.
Aged Bronze (Hand-Brushed) — a rich, deep tone with a soft, greenish patina. The hand-brushed process ensures that every piece has its own unique character.
Antique Brass (Hand-Brushed) — an artisanal brushed finish with intentional variation. These differences are part of the design language, not imperfections.
Unlacquered Antique Brass (Hand-Brushed) — a living finish with no protective coating. Delivered with an aged appearance, it will continue to evolve over time as it reacts to air, touch, and its environment.
Satin Brass — a smooth brushed finish sealed with a protective lacquer. It maintains its original tone and slows down natural aging.
Stainless Steel — a clean, cool metallic finish with a refined brushed texture.
Matte Black — a solid brass base coated in a deep matte black for a bold, architectural presence.
White — a clean, minimalist coating over solid brass for a crisp, understated look.
Batch variation & hand-finishing notes:
Because each plate is finished by hand, slight differences in tone and patina between batches are expected. Factors such as brushing pressure, polishing, paint mixing, and even humidity can influence the final appearance.
Most finishes may vary by up to approximately 10% between batches.
For Unlacquered Antique Brass, a distinct oxidizing process is used. As a result, variations can be more pronounced, sometimes reaching up to 30% lighter or darker tones.
To ensure consistency, we make every effort to ship items from the same production batch whenever possible.
These natural variations are an inherent characteristic of genuine brass and are not considered defects.
Product Includes
Brass plate, diamond cut dimmer knob, plus all required mounting hardware.
Installation Steps
Step 1: Turn Off the Power
Before you begin, switch off the power to the circuit at your home’s breaker panel or fuse box for safety.
Step 2: Remove the Old Cover Plate
Use a screwdriver to loosen the screws holding the existing cover plate. Remove it carefully and place it aside.
Step 3: Take Out the Old Switch
Unscrew the fasteners securing the old switch to the electrical box, then gently pull the switch outward.
Step 4: Disconnect the Wires
Carefully detach the wires from the old switch.
• If the wires are looped around screws, loosen the screws to release them.
• If the wires are pushed into holes at the back of the switch, you may need to cut and strip them using a wire stripper.
Step 5: Connect the Wires to the New Switch
Attach the wires to the new dimmer switch.
• If the switch uses screws, wrap the wires around them and tighten securely.
• If the switch has push in holes, insert the stripped wire ends into the openings.
Step 6: Secure the New Switch
Carefully place the wires back into the electrical box and fasten the new switch using the included screws.
Step 7: Attach the New Cover Plate
Position the new cover plate over the switch and secure it in place with the screws.
Step 8: Turn the Power Back On
Once everything is installed, restore power at the breaker panel or fuse box.
Step 9: Test Your New Switch
Turn the dimmer knob to confirm everything is working correctly. If installed properly, your lights should brighten and dim smoothly.
If anything seems unclear or does not feel right during installation, contact a licensed electrician. Safety should always come first.
Solid Brass Weight & Feel
Rich, tactile, built to last
Knurled Precision Control
Textured grip for effortless adjustment
Seamless Silent Dimming
Smooth, flicker free light control
Yes. Each Brass Rotary Dimmer Switch is carefully made by hand, with close attention to finish and detail.
Yes. It is UL listed, confirming that it meets recognized safety standards.
Its solid brass construction gives it excellent strength and long term reliability, while also providing a smooth and premium tactile experience.
This switch is made from solid brass, giving it a substantial feel, strong durability, and a refined decorative look.
Yes. It is designed for standard US electrical boxes, which makes it suitable for both replacements and new installations.
In many cases, installation takes only around 5 minutes, making it a simple upgrade for your space.
Yes. It is compatible with Triac dimming and works with supported LED lighting.
Weight varies by configuration, ranging from 1.5 to 4 lbs depending on whether you choose 1 to 4 gangs.
Yes. Its classic brass design makes it especially well suited to traditional interiors and historic properties.
Yes. The Brass Rotary Dimmer Switch can be used with LED bulbs when paired with Triac dimming.
Refined Finishes
Premium tones designed to match any interior style.
Effortless Installation
Installs quickly with standard US electrical boxes.
Natural Patina
Develops a unique finish over time with use.
Precision Knurled Grip
Smooth rotation with controlled tactile feedback.
UL & ETL Certified
Meets strict US safety standards for reliable performance.
Precision Engineered
Hand assembled components ensure consistent performance and durability.
Fast Shipping
USPS 4 to 10 days delivery
30 Day Returns
Easy and stress free returns
Lifetime Warranty
Reliable protection included
