Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
2-Gang Solid Brass Dimmer + Toggle Wall Plate
Aged Bronze (Hand-Brushed) / Matching
$72.00
Skip to product information
2-Gang Solid Brass Dimmer + Toggle Wall Plate
Solid brass
Built to last 50+ years
UL & CE Certified
Tested for US & EU safety standards
Antimicrobial
Brass kills 99.9% of bacteria
$72.00
Questions or custom requests? We're here to help.
Phone
+1 (505) 405-0498
Also available on live chat
Can't find the exact switch or layout you need?
Try our Product Configurator to build your perfect combo: mix toggles, dimmers, outlets, or order plates only in any 1–5 gang setup.
Dimensions & Specifications
A 2-gang combination wall plate cast in solid brass, no plating, no compromise. The full 0.080″ thickness gives it real weight in the hand and a quiet authority on the wall, with one round rotary cutout for a dimmer and one vertical slot cutout for a toggle switch — the classic pairing for a living room or bedroom entry.
Fits any standard North American 2-gang box. Installs in minutes with the matched solid brass screws included in the box.
- Plate dimensions: 4.56″ × 4.70″ × 0.08″
- Mounting hardware: 1.97″ screws, 0.28″ head, slotted
Finishes & Natural Variations
Our wall plates are crafted from solid brass and finished entirely by hand. This process gives each piece a deeper, more refined look than plated alternatives, while naturally allowing for subtle variations from one item to another.
Aged Bronze (Hand-Brushed) — a rich, deep tone with a soft, greenish patina. The hand-brushed process ensures that every piece has its own unique character.
Antique Brass (Hand-Brushed) — an artisanal brushed finish with intentional variation. These differences are part of the design language, not imperfections.
Unlacquered Antique Brass (Hand-Brushed) — a living finish with no protective coating. Delivered with an aged appearance, it will continue to evolve over time as it reacts to air, touch, and its environment.
Satin Brass — a smooth brushed finish sealed with a protective lacquer. It maintains its original tone and slows down natural aging.
Stainless Steel — a clean, cool metallic finish with a refined brushed texture.
Matte Black — a solid brass base coated in a deep matte black for a bold, architectural presence.
White — a clean, minimalist coating over solid brass for a crisp, understated look.
Batch variation & hand-finishing notes:
Because each plate is finished by hand, slight differences in tone and patina between batches are expected. Factors such as brushing pressure, polishing, paint mixing, and even humidity can influence the final appearance.
Most finishes may vary by up to approximately 10% between batches.
For Unlacquered Antique Brass, a distinct oxidizing process is used. As a result, variations can be more pronounced, sometimes reaching up to 30% lighter or darker tones.
To ensure consistency, we make every effort to ship items from the same production batch whenever possible.
These natural variations are an inherent characteristic of genuine brass and are not considered defects.
Installation Guide
Step 1: Turn Off Power
Before you begin, switch off the power at your circuit breaker or fuse box to ensure complete safety.
Step 2: Remove the Existing Plate
Unscrew the current wall plate using a screwdriver. Carefully lift it away and set it aside.
Step 3: Take Out the Old Switch
Unscrew the switch from the electrical box and gently pull it forward to access the wiring.
Step 4: Disconnect the Wiring
Remove the wires from the existing switch:
• If the wires are wrapped around screws, loosen them.
• If they are inserted into terminals, release them and strip the ends if needed.
Step 5: Connect the New Switch
Attach the wires to your new toggle switch:
• Black (live) wire to the brass or black screw
• White (neutral) wire to the silver screw (if required)
• Green or bare copper wire to the green grounding screw
Ensure each connection is firmly secured.
Step 6: Secure the Switch
Carefully place the wires back into the electrical box. Align the switch and fasten it using the provided screws.
Step 7: Install the Cover Plate
Position the brass plate over the switch and secure it in place with the included screws.
Step 8: Restore Power
Turn the power back on at the breaker or fuse box.
Step 9: Test the Installation
Flip the switch on and off to confirm everything is working correctly. The connected light or device should operate smoothly.
Frequently asked questions
Is the product handcrafted?
Yes. Each plate is carefully made by hand, with close attention to finish and detail.
Is it easy to install?
Yes, fits any US Standard electrical box in under 5 minutes. No special tools required.
What is it made of?
Solid brass throughout. No plating, no shortcuts, the same material inside and out.
How long will the finish last?
Indefinitely with normal use. Brass is one of the most wear-resistant metals it doesn't chip, peel, or corrode.
The lacquered finish protects it for 10+ years. The unlacquered version will patina naturally over time.
How long does installation usually take?
In many cases, installation takes only around 5 minutes, making it a simple upgrade for your space.
Does it work in historical or period homes?
Yes, the profile and finish are period-appropriate and complement pre-war, industrial, and transitional interiors without looking out of place.
Is it suitable for high-traffic areas?
Yes. Rated for 1,000,000+ cycles. Built for daily use over decades.
You may also like
Fast Shipping
USPS 4 to 10 days delivery
30 Day Returns
Easy and stress free returns
Lifetime Warranty
Reliable protection included