Rejuvenation and Restoration Hardware Switch Plates

Rejuvenation and Restoration Hardware both sell switch plates as part of a whole house hardware line, which changes three things for a buyer: how many pieces arrive in the box, how much of the specification is published, and whether you can still match the finish in year five. This article sets out what each one published on 13 October 2026, and where Studio Timeless is and is not the better choice.

In short

• Rejuvenation’s Classic Switchplate Collection is described as crafted from solid brass, is listed at 199 to 509 dollars, and includes the switch or dimmer mechanism. It is not a plate on its own.
• Its published plate thickness is 1/4 inch, roughly three times our 0.080 inch. On that measurement we are the thinner plate and we say so.
• The published single gang footprint is 4-5/8 by 2-3/4 inches against our 4.70 by 2.80 inches, so the two sit on the wall at nearly the same size.
• Restoration Hardware’s switch plate pages did not return readable content on 13 October 2026, so no material, finish, thickness or price is quoted here for that brand.
• Neither brand named a safety certification on the pages read, and none of the three publishes a country of manufacture on its product pages. An absence is an absence, not a finding.

What a generalist actually sells you

A generalist sells a switch plate as one line in a hardware catalogue that also holds knobs, pulls, door sets, hooks and lighting, and that shapes the product more than the price does. The appeal is obvious and real: one order, one finish language, one delivery, and a plate that is meant to sit beside the cabinet knob and the door handle you bought from the same page. The cost is depth. A specialist carries more gang counts, more opening types and more spare parts for one narrow family, because that family is the whole business. Neither model is better in the abstract. The question is which failure mode you would rather live with, and that is a project question, not a brand question.

Rejuvenation publishes its specification, and this is what it says

Rejuvenation publishes a genuinely detailed specification for its Classic Switchplate Collection, which is unusual in this category and worth acknowledging. Read on 13 October 2026, the collection page describes the product as crafted from solid brass in your choice of finish, lists a price range of 199 to 509 dollars, and gives dimensions: a plate thickness of 1/4 inch, a dimmer knob diameter of 1 inch with 1/2 inch projection, a toggle diameter of 3/8 inch with 7/8 inch projection, and a total depth of 2-1/8 inch. Overall sizes run from 4-5/8 inches high by 2-3/4 inches wide for a single, to 6-1/3 by 4-1/2 inches for a triple toggle and 4-5/8 by 8-1/8 inches for a quad. Configurations cover toggle in single, double, triple and quad, dimmer in the same four counts, and combined arrangements pairing a single or double toggle with a single or double dimmer. The box is stated to contain the faceplate, the toggle or dimmer mechanism, the knob, a wire nut connector, mounting hardware, instructions and wiring diagrams. A specifier can work from that. Many brands in this category publish none of it.

Restoration Hardware’s switch plate pages did not open on 13 October 2026

Restoration Hardware lists metal switch plates in single, double and triple versions, and on 13 October 2026 none of those pages returned readable content to us. The product pages responded with unreadable data rather than text, and the Switch Plates category page returned a crawling restriction. We are therefore quoting no material description, no finish list, no dimension and no price for that brand, because we only publish competitor facts we have read on the day of writing. That is a limitation of this article, and it is also the finding: a designer who needs a plate thickness or a box depth to specify a wall cannot get either from the pages we tried. The brand names the product and sells it; the specification lives somewhere other than the page.

Axis one: count the pieces in the box before you compare anything

The first question in any switch plate comparison is how many pieces you are buying, because it changes who is responsible when the parts do not line up. Rejuvenation includes the mechanism, which makes its collection an assembly rather than a cover. Studio Timeless goes one step further: our switches arrive as a single integrated brass unit, plate and mechanism in one body, mounted into the existing wall box. Plates on their own exist as a separate family for covering devices you already own, listed under wall plates. The three part American convention, device from one maker and plate from another, is the model we do not use, and the reason is alignment: nobody has to make two suppliers agree.

Plate thickness, read side by side, and the number that goes against us

Rejuvenation’s published 1/4 inch plate is about three times the thickness of our 0.080 inch plate, and that is a real difference a hand can feel. We publish it because a comparison that only contains favourable numbers is worth nothing. A thicker plate reads heavier at the wall, tolerates a less than perfect plaster face, and stands further off the surface. A thinner plate sits closer to the wall, needs a flatter substrate, and uses less brass for the same footprint. Neither is a quality verdict. What matters for specification is that 1/4 inch of standoff plus a 7/8 inch toggle projection is a different wall profile from ours, and a drawing that assumes one will not describe the other.

The footprint is nearly identical, which is the useful finding

At the wall, the two single gang plates cover almost exactly the same rectangle: 4-5/8 by 2-3/4 inches against our 4.70 by 2.80 inches, a difference of under a tenth of an inch on each axis. That convergence is not a coincidence. American wall boxes and device openings are dimensioned around the ANSI and NEMA WD 6 dimensional specification for wiring devices, so anyone building for this market lands on the same face size. The practical use is that a plate from either maker will cover the same hole in the plaster, and the decision moves to thickness, opening type and what is behind the face. Our own gang by gang sizing is set out in switch plates and outlet covers: sizing and gangs.

Axis two: what each brand says about its own certification

Neither Rejuvenation nor Restoration Hardware named a safety certification on the pages we read on 13 October 2026, and we are not turning that silence into a claim. Pages change, certifications are held at the manufacturer level, and a plate without a mechanism may not need one at all. What we can do is say what we hold and what we do not. Our knurled toggles, our 120V rotary dimmers and our outlets are UL listed. Our Retro Toggle carries a CE marking and does not carry a UL Listing. That matters because UL states that a Listed product carries a marking identifying the Listed company, that a certification is verified in UL Product iQ, and that a CE marking is not a Listing. Ask every supplier the same question in writing, and read the answer rather than the marketing. The authority having jurisdiction and the adopted edition of NFPA 70, the National Electrical Code, settle it on your project, not a catalogue.

Axis three: year five, when one plate gets damaged

The question that separates a generalist from a specialist is what happens when one plate is damaged four years after the renovation. A hardware line carried by a generalist is curated and refreshed, and collections are retired; a specialist that sells only switches, plates and small brass parts keeps a spares shelf because repeat orders are the business. We publish the spares as products: a knurled toggle replacement module at 39 dollars, a WK2300I rotary dimmer module at 39 dollars, two rotary dimmer modules at 54.90 dollars, and brass screws and extensions from 40 dollars for ten, all listed under replacement parts. The honest caveat is that a lacquered brass finish from a later production batch will not be a perfect match to one bought five years earlier, which is why we tell people to buy roughly seven percent of their lever count as spares at the time of the original order. Our guide to replacement modules covers what can and cannot be swapped.

Price, on the only basis that is fair

A price comparison is only meaningful when both products include the mechanism, and here both do. Rejuvenation’s published 199 to 509 dollar range for the Classic Switchplate Collection covers toggle and dimmer configurations from one to four positions. Our comparable products are the switch units, not the plates, and they are priced below that range at the entry point and above it at the top.

Read it honestly. A single toggle position costs less from us. A five position dimmer run costs more from us than the top of their published range, and they do not appear to offer five positions at all. Dimmers are where the money goes on both sides, a point our article on the dial as a control format works through, and where the cost per position stops falling.

Finish vocabulary is where whole house coordination actually breaks

Coordinating a brass switch plate with brass cabinet hardware is harder than any catalogue photograph suggests, and the reason is vocabulary rather than colour. Our own catalogue carries seven different finish vocabularies: eight finish names on the knurled switches and rotary dimmers, seven on the Retro Toggle, seven on the wall plates, ten on the outlets, five on the low voltage controllers, thirteen on the door hinges, and a set of option names on cabinet hardware where the finish is welded to the size inside one value. Only black overlaps cleanly between the electrical side and the cabinet side. Rejuvenation’s switch plate pages named oil-rubbed bronze, brushed nickel, antique brass, unlacquered brass and polished nickel across the pages read, with the category described as brass, stainless steel and polished nickel. Those are different words for overlapping intentions, and words do not transfer between makers. The only reliable method is physical samples in the room’s own light: order our Finish Sample Set, read our finishes page, and see how to verify a finish before ordering.

The rocker, Decora and push button question

A generalist usually covers more device formats than a specialist in brass, and that is a genuine advantage. Rejuvenation’s switch plate category, as described on the page read, covers toggle, rocker and push button switchplates plus single and double outlet covers and blank covers. If your electrician has already installed rocker devices, or if the house calls for a push button look on a plate rather than an integrated unit, that breadth is the answer. On our side, the Decorator rectangle is covered by the 1-gang Brass Decorator Wall Plate at 55 dollars, with the Stainless Steel variant at 50 dollars, and blanks and combinations sit in the same family. We do not make a push button device. The format history is in Decora against toggle, and the period question in the history of the push button switch.

Country of manufacture: none of the three publishes one

None of the three brands in this article states a country of manufacture on its switch plate product pages, and that includes us. Rejuvenation’s switch plate category page links to a page about its factory without naming a location on the page read, and the brand’s homepage carries an image caption reading assembled at our Portland, Oregon factory on a lighting promotion rather than on any switch plate. We will not stretch that caption into a claim about switch plates, and we will not stretch our own silence into one either. For American buyers this matters legally as well as emotionally: the FTC Made in USA Labeling Rule at 16 CFR Part 323 sets conditions an unqualified claim has to meet, which is precisely why careful brands say less rather than more. If origin is a project requirement, ask for it in writing from whoever you buy from, including us.

Where a generalist is the better buy

There are four situations where Rejuvenation or a similar generalist is objectively the right call. When the switch plate is one line in a large hardware order and a single finish language across knobs, pulls, door sets and plates matters more than depth of range. When the device is already a rocker or a push button and you want a plate rather than a new unit. When the specification you need is published and you want it from one page, which Rejuvenation does better than most. And when the project wants a visibly thicker plate standing off the wall, where 1/4 inch beats 0.080 inch on the brief. In those cases we are not the better buy and there is no point pretending otherwise.

Where we are the better buy

We are the right choice when the switches themselves are the detail, and that narrows to five cases. When you need gang counts a generalist does not carry, including five position dimmer runs. When you want an integrated brass unit with no visible plastic, which the brass light switch range is built around. When a UL listing is a condition on the toggles, dimmers or outlets. When you need spare modules and screws on a shelf years later. And when the plate has to be engraved or built with a mixed set of openings, which the Custom Configurator handles and our engraving guide explains. Designers running several projects a year should look at the trade programme.

How to compare two switch plate quotes in ten minutes

Six questions, asked of both suppliers in writing, settle almost every switch plate comparison. What exactly is in the box, and is the mechanism included. What is the plate thickness and the total assembly depth. What opening does the plate have, and does it match the device already in the wall. What certification does the mechanism carry, and under whose name is it listed. What spare parts are sold separately, and for how long. And what finish names exist, with a physical sample offered before the order. If one supplier answers all six and the other answers three, you have learned something more useful than a price. Where wiring is involved, check the answers against our installation and compatibility guide and never accept a verbal compatibility assurance, including from us.

Frequently asked questions

Does Rejuvenation sell solid brass switch plates?

Yes. The Classic Switchplate Collection is described on its page, read 13 October 2026, as crafted from solid brass in your choice of finish, with a published plate thickness of 1/4 inch and a price range of 199 to 509 dollars.

Do Rejuvenation switch plates include the switch mechanism?

Yes, according to the box contents published on the collection page: the faceplate, the toggle or dimmer mechanism, the knob, a wire nut connector, mounting hardware, instructions and wiring diagrams.

Does Restoration Hardware sell light switches or switch plates?

Restoration Hardware lists metal switch plates in single, double and triple versions. We cannot quote their material, finishes, dimensions or price because the product pages did not return readable content on 13 October 2026.

How thick is a Studio Timeless switch plate compared with Rejuvenation’s?

Ours is 0.080 inch. Rejuvenation publishes 1/4 inch for the Classic Switchplate Collection, roughly three times the thickness. The single gang face sizes are nearly identical at 2.80 by 4.70 inches against 2-3/4 by 4-5/8 inches.

Which is cheaper, Studio Timeless or Rejuvenation?

At one position we are cheaper: 84 dollars for a knurled toggle and 92 dollars for a retro toggle, against a published range starting at 199 dollars. At a five position dimmer run we are more expensive, at 579 dollars, and no five position configuration appears in their published range.

Are Rejuvenation or Restoration Hardware switch plates UL listed?

Neither brand named a safety certification on the pages we read on 13 October 2026. An absence on a page is not evidence either way. Ask the supplier in writing and verify any claimed listing in UL Product iQ.

Can I mix a generalist’s switch plates with Studio Timeless switches?

We never confirm compatibility with another manufacturer’s plate or mechanism without written confirmation from that manufacturer. Our switches are integrated units sized for the American wall box, so a third party plate is not part of the assembly.

Will a brass switch plate match brass cabinet hardware?

Not by name. Our catalogue alone carries seven different finish vocabularies, and only black overlaps cleanly between the electrical and cabinet sides. Compare physical samples in the room’s own light rather than finish names on screens.

Where are Rejuvenation switch plates made?

The switch plate pages read on 13 October 2026 did not state a country of manufacture. The brand’s homepage carries a caption about assembly at a Portland, Oregon factory on a lighting promotion, not on a switch plate. We do not publish a country on our own product pages either.

What is the advantage of buying switch plates from a hardware specialist?

Depth rather than breadth: more gang counts, more opening types, engraving, and spare modules and screws still sold years later. A generalist gives you one finish language across an entire hardware order instead.

Do I need a new plate if I change switch style?

Usually yes. A round 12 mm retro lever opening, a standard rectangular toggle cutout and a Decorator rectangle are different shapes, and a dimmer opening does not convert into a toggle opening.

What should I ask before ordering switch plates from any brand?

What is in the box, the plate thickness and assembly depth, the opening shape, the certification and whose name it is under, the spare parts sold separately, and a physical finish sample before the order.

Which one to specify

Buy from a generalist when the plate is one line in a hardware order and a single finish language matters more than range depth, or when the brief wants a visibly thicker plate than our 0.080 inch. Buy from us when the switches are the detail: integrated brass units with no visible plastic, gang counts up to five on the dimmers, engraving, UL listed toggles, dimmers and outlets, and spares still on the shelf in year five. Start with switches and outlets, compare the imported brands in our guide to Buster and Punch alternatives, and see the other European comparisons on Corston, Meljac and Forbes and Lomax.

Last updated: October 13, 2026