Solid brass
Built to last 50+ years
UL & CE Certified
Tested for US & EU safety standards
Antimicrobial
Brass kills 99.9% of bacteria
Questions or custom requests? We're here to help.
Can't find the exact switch or layout you need?
Try our Product Configurator to build your perfect combo: mix toggles, dimmers, outlets, or order plates only in any 1–5 gang setup.
Crafted for straightforward control, this brass fan speed control switch is a manual 120V wall-mounted solution designed for standard ceiling paddle fans in U.S. residential installations.
Rated at 120VAC, 60Hz and UL Listed, it is intended for setups where the fan and light are wired separately within the wall box. It serves as a direct replacement for traditional mechanical fan switches, gear-style controls, or stepless manual controllers.
This control is not compatible with smart fans, remote-controlled fans, or any system that includes built-in electronic modules or receivers.
Depending on the fan, an initial increase in power may be required to start the blades. It is therefore normal for the knob to be turned roughly halfway before the fan begins to spin. Once running, the speed can then be adjusted smoothly and precisely.
Product details:
Compatibility:
Included mounting screws:
Our wall plates are crafted from solid brass and finished entirely by hand. This process gives each piece a deeper, more refined look than plated alternatives, while naturally allowing for subtle variations from one item to another.
Aged Bronze (Hand-Brushed) — a rich, deep tone with a soft, greenish patina. The hand-brushed process ensures that every piece has its own unique character.
Antique Brass (Hand-Brushed) — an artisanal brushed finish with intentional variation. These differences are part of the design language, not imperfections.
Unlacquered Antique Brass (Hand-Brushed) — a living finish with no protective coating. Delivered with an aged appearance, it will continue to evolve over time as it reacts to air, touch, and its environment.
Satin Brass — a smooth brushed finish sealed with a protective lacquer. It maintains its original tone and slows down natural aging.
Stainless Steel — a clean, cool metallic finish with a refined brushed texture.
Matte Black — a solid brass base coated in a deep matte black for a bold, architectural presence.
White — a clean, minimalist coating over solid brass for a crisp, understated look.
Batch variation & hand-finishing notes:
Because each plate is finished by hand, slight differences in tone and patina between batches are expected. Factors such as brushing pressure, polishing, paint mixing, and even humidity can influence the final appearance.
Most finishes may vary by up to approximately 10% between batches.
For Unlacquered Antique Brass, a distinct oxidizing process is used. As a result, variations can be more pronounced, sometimes reaching up to 30% lighter or darker tones.
To ensure consistency, we make every effort to ship items from the same production batch whenever possible.
These natural variations are an inherent characteristic of genuine brass and are not considered defects.
Product Includes
Brass plate, diamond cut dimmer knob, plus all required mounting hardware.
Installation Steps
Step 1: Turn Off the Power
Before you begin, switch off the power to the circuit at your home’s breaker panel or fuse box for safety.
Step 2: Remove the Old Cover Plate
Use a screwdriver to loosen the screws holding the existing cover plate. Remove it carefully and place it aside.
Step 3: Take Out the Old Switch
Unscrew the fasteners securing the old switch to the electrical box, then gently pull the switch outward.
Step 4: Disconnect the Wires
Carefully detach the wires from the old switch.
• If the wires are looped around screws, loosen the screws to release them.
• If the wires are pushed into holes at the back of the switch, you may need to cut and strip them using a wire stripper.
Step 5: Connect the Wires to the New Switch
Attach the wires to the new dimmer switch.
• If the switch uses screws, wrap the wires around them and tighten securely.
• If the switch has push in holes, insert the stripped wire ends into the openings.
Step 6: Secure the New Switch
Carefully place the wires back into the electrical box and fasten the new switch using the included screws.
Step 7: Attach the New Cover Plate
Position the new cover plate over the switch and secure it in place with the screws.
Step 8: Turn the Power Back On
Once everything is installed, restore power at the breaker panel or fuse box.
Step 9: Test Your New Switch
Turn the dimmer knob to confirm everything is working correctly. If installed properly, your lights should brighten and dim smoothly.
If anything seems unclear or does not feel right during installation, contact a licensed electrician. Safety should always come first.
Solid Brass Weight & Feel
Rich, tactile, built to last
Knurled Precision Control
Textured grip for effortless adjustment
Smooth Speed Control
Quiet, stepless fan regulation
Yes. Each fan speed module is carefully made by hand, with close attention to finish and detail.
Yes. It is UL listed, confirming that it meets recognized safety standards.
Its solid brass construction gives it excellent strength and long term reliability, while also providing a smooth and premium tactile experience.
This switch is made from solid brass, giving it a substantial feel, strong durability, and a refined decorative look.
Yes. It is designed for standard US electrical boxes, which makes it suitable for both replacements and new installations.
In many cases, installation takes only around 5 minutes, making it a simple upgrade for your space.
Refined Finishes
Premium tones designed to match any interior style.
Effortless Installation
Installs quickly with standard US electrical boxes.
Natural Patina
Develops a unique finish over time with use.
Precision Knurled Grip
Smooth rotation with controlled tactile feedback.
UL & ETL Certified
Meets strict US safety standards for reliable performance.
Precision Engineered
Hand assembled components ensure consistent performance and durability.
Fast Shipping
USPS 4 to 10 days delivery
30 Day Returns
Easy and stress free returns
Lifetime Warranty
Reliable protection included
